|
|
| |
|
Drill Chuck 4 mm (0.16 in)
This stainless steel Jacobs chuck grip holds samples securely during tension or compression testing. Maximum sample diameter is 4 mm (0. 16 in).
Capacity
100 N, 22.5 lbf
Packaging
Single grip only
Applications
Ideal for holding cylindrical samples up to 4 mm (0.16 in) during tension or compression testing.
... more information
|
|
Drill Chuck 6 mm (0.23 in)
This stainless steel Jacobs chuck grip holds samples securely during tension of compression testing. Maximum sample diameter is 6 mm (0.23 in).
Capacity
100 N, 22.5 lbf
Packaging
Single grip only
Applications
Ideal for holding cylindrical samples up to 6 mm (0.23 in) during tension or compression testing.
... more information
|
|
Chuck Grips for Cement Samples
Profiled chuck grips are ideal for testing cement samples. Use for pre-formed cement bricks.
Capacity
10 kN, 2248 lbf
Packaging
Includes upper and lower grips.
Applications
Used for determining the tensile strength of cement mortar by casting and testing briquette samples. Test method is similar to that described in ASTM C190:1985 (Standard test method for tensile strength of hydraulic cement mortars).
... more information
|
|
Split Shoulder Profiled Chuck Grips
Ideal for testing metal dumbbell samples.
Two types of grips are available:
TG 16/B grips for metric B test specimens (B = 5.5 mm (0.22 in) parallel section)
TG 16/C grips for metric C test specimens (C = 7.5 mm (0.3 in) parallel section)
Capacity
20 kN, 4496 lbf
Packaging
Includes upper and lower grips.
Applications
Used for straining a metal dumbbell sample by tensile force, generally to fracture.
Standards Applicable
Test method is similar to that described in ISO 6892 (metallic materials - tensile testing) and BS 18:1987.
... more information
|
|
Metal Dumbbell and Plate Sample Chuck Grips
These grips are used for high tensile, flat plate, metal dumbbell samples. Samples must have clearance holes drilled in either end to accept the clamping disks. Clearance holes are 7.94 mm (0.31 in) in diameter. Maxiumum sample width is 35 mm (1.38 in). Maximum sample thickness 6 mm (0.23 in).
Capacity
20 KN, 4496 lbf
Packaging
Includes upper and lower grip.
Applications
Used for straining a metal dumbbell sample by tensile force, generally to fracture.
... more information
|
|
|
|
|
